Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Magnetization of cell phone magnetic charging head is a key operation to restore or enhance its magnetic suction adsorption, the core is to supplement the magnetism of the magnet body in a reasonable way to solve the problem of loose adsorption and poor contact during charging. The operation should be combined with the type of charging head magnet (such as NdFeB magnet), follow the safety regulations to avoid magnet damage or equipment failure, and at the same time to ensure that the magnetic strength of the charging head is suitable for the charging interface of the cell phone after magnetization, which will not affect the charging efficiency and safety of the equipment.

The core objective of magnetizing the magnetic charging head for cell phones is to improve the stability of magnetic attraction and ensure smooth charging. When operating, it is necessary to clarify the magnet specifications, choose the appropriate magnetization method, and strictly control the safety details; after magnetization, it is necessary to check the adsorption strength and charging effect, so as to avoid over-hypermagnetization leading to demagnetization of the magnet or interference with the device. Reasonable magnetization operation can effectively extend the service life of the magnetic charging head and solve the adsorption problems in daily charging.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

NdFeB Magnet Magnetization Guide – JIUJU Shows How to Select a Magnetizer

November 11, 2025

Key Points for Selecting NdFeB Magnet Magnetizers – JIUJU Professional Magnetization Solutions, Pulse Magnetizer Specifications, Equipment for High-Coercivity Materials, and Selection of Magnetizers for Permanent Magnetic Materials

JiuJu Magnetism Industry News] Preparation method of LaCoO3 chalcogenide material and its catalytic degradation effect on formaldehyde wastewater

January 9, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Formaldehyde (HCHO) is a widely-existing water-soluble toxic pollutant, which mainly originates from industrial production emissions, volatilization of construction and decoration materials, and release of daily necessities. This compound is strongly carcinogenic and biotoxic, which will not only cause serious damage to the human respiratory system and immune system, but also destroy the ecological balance of the water body. Therefore, ...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...

JiuJu Magnetism Industry News] Preparation method of LaCoO3 chalcogenide material and its catalytic degradation effect on formaldehyde wastewater

January 9, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Formaldehyde (HCHO) is a widely-existing water-soluble toxic pollutant, which mainly originates from industrial production emissions, volatilization of construction and decoration materials, and release of daily necessities. This compound is strongly carcinogenic and biotoxic, which will not only cause serious damage to the human respiratory system and immune system, but also destroy the ecological balance of the water body. Therefore, ...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...

JiuJu Magnetism Industry News] Preparation method of LaCoO3 chalcogenide material and its catalytic degradation effect on formaldehyde wastewater

January 9, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Formaldehyde (HCHO) is a widely-existing water-soluble toxic pollutant, which mainly originates from industrial production emissions, volatilization of construction and decoration materials, and release of daily necessities. This compound is strongly carcinogenic and biotoxic, which will not only cause serious damage to the human respiratory system and immune system, but also destroy the ecological balance of the water body. Therefore, ...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...

JiuJu Magnetism Industry News] Preparation method of LaCoO3 chalcogenide material and its catalytic degradation effect on formaldehyde wastewater

January 9, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Formaldehyde (HCHO) is a widely-existing water-soluble toxic pollutant, which mainly originates from industrial production emissions, volatilization of construction and decoration materials, and release of daily necessities. This compound is strongly carcinogenic and biotoxic, which will not only cause serious damage to the human respiratory system and immune system, but also destroy the ecological balance of the water body. Therefore, ...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...

JiuJu Magnetism Industry News] Preparation method of LaCoO3 chalcogenide material and its catalytic degradation effect on formaldehyde wastewater

January 9, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Formaldehyde (HCHO) is a widely-existing water-soluble toxic pollutant, which mainly originates from industrial production emissions, volatilization of construction and decoration materials, and release of daily necessities. This compound is strongly carcinogenic and biotoxic, which will not only cause serious damage to the human respiratory system and immune system, but also destroy the ecological balance of the water body. Therefore, ...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...